Cruise control for TJ magna

[Ziek]

hi guys, im wanting to put cruise control in to my 2002 TJ magna series 1.5 (manual converted), so, im guessing im going to need a few things, if you guys could rattle off the items i need it would be very much appreciated

[mcs_xi]

From memory you will need:
- Brake Switch
- Cruise control ECU (small tin box located near the shifter)
- Steering wheel clock spring & cruise switch. Potentially new steering wheel or at least steering wheel backing.
- Vacuum pump on drivers side under windscreen air intake
- Hoses
- Cruise control Throttle body
- Cruise control relays & fuses.

I believe the TJ has the wiring ready to go for the cruise control. Your manual look would probably have it already. Look for a spare plug near the washer bottle.

If your manual conversion was done properly, then you would have changed the engine harness. If you still have your Auto engine harness, then you will have to cut the speed sensor wire at the ECU and then your cruise should work properly with the clutch as well as the brake.

Mike

[Ziek]

Thank you for the shopping list, i shall start on this straight away, i may even change that engine harness as well, i also noticed the spare plug at the washer bottle.

once again, thank you for the help there mcs_xi

[Wombatkarl]

My tj sports has cruise control ..but i still have a spare plug near the washer bottle ..so i don't think thats for the cruise control.

[mcs_xi]

My tj sports has cruise control ..but i still have a spare plug near the washer bottle ..so i don't think thats for the cruise control.

The spare plug near the washer bottle has many pins.

There is always another spare plug with simply 2 wires UNDER the washer bottle, and it is for the wagon extra water pump for the rear screen.

[Luushen]

i thought ya had to replace the engine harnes to install oem cruise control, i do hope im wrong as im a bout to do it as well

[Ziek]

just wondering if anyone has done the factory cruise on a TJ magna, im trying to track down the plug that goes in to the cruise ecu, all other plugs are there and connected, just at a loss as to where that last plug is for the cruise ecu. thanks for any replies guys

[Ziek]

So its been 3 days since i last asked here about this 1 plug, and no reply, so im assuming no one here had an exec tj or better i guess, with no cruise, and went out to the wreckers or anywhere where else and bought a second hand factory cruise control and fitted it to their car?. as i said before, im just looking for this 1 plug that connects to the cruise ecu that mitsubishi has hidden. i have everything else there, so i know this plug exists because all the other wiring goes in to it.

Thanks for any replies guys